Suzuki VZR1800 Service Manual page 22

FRONT FORK INNER ROD LOCK NUT
• Tighten the lock nut 1 to the bottom of inner rod threads.
FORK SPRING
• Install the fork spring as shown in the illustration.
• Install the spring 1 and spacer 2.
FRONT FORK CAP BOLT
• Pull up the inner rod with the special tool A.
• Compress the spring with the special tool B and then insert
the special tool C between the lock nut and the spacer.
09940-52841: Front fork inner rod holder A
09940-94930: Front fork spacer holder B
09940-94922: Front fork spring stopper plate C (11 mm)
• Slowly turn the cap bolt 1 until the inner rod is lightly seated.
• Hold the cap bolt 1 and tighten the lock nut 2 to the speci-
fied torque.
Inner rod lock nut: 15 N·m (1.5 kgf-m, 11.0 lbf-ft)
• Remove the special tools.
• Fit the O-ring to the front fork cap bolt and apply fork oil.
Use a new O-ring to prevent oil leakage.
VZR1800/ZL0 ('10-MODEL) 21
Upper side
Lower side