22 VZR1800/ZL0 ('10-MODEL)
INSTALLATION
Install the front fork in the reverse order of removal. Pay atten-
tion to the following points:
• Install the front fork to the steering stem and steering stem
upper bracket.
• Install the top of outer tube 5 mm (0.2 in) A higher than the
upper surface of the steering stem upper bracket and tighten
the front fork lower clamp bolts 1 to the specified torque.
Front fork lower clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Tighten the front fork cap bolt 2 to the specified torque and
recheck the front fork outer tube upper surface height.
Front fork cap bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Tighten the front fork upper clamp bolt 3.
Front fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Install the front fender.
• Remount the front wheel. (
• Install the headlight housing assembly.
VZR1800K6 9-13)