Setting The Phone To Receive Data Or Faxes - Kyocera 3225 User Manual

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the
system sending the information. To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone from voice mode to data/fax
mode.
Note: To purchase a cable, you can contact your service provider or purchase
one from us at (800) 349-4188 (U.S.A. only) or (858) 882-1410, or online at
www.kyocera-wireless.com/store.
1. Connect the phone to the laptop or PC. (See page 88.)
2. Set the Com Speed (See "Connecting to a laptop or a PC" on page 88.)
Select Menu → Settings → Network → Data/Fax Calls.
3.
4. Press to select an option:
– Voice only—Allow only voice calls.
– Fax, next call—Set the phone to fax mode for the next incoming call or the
next 10 minutes.
– Data, next call—Set the phone to data mode for the next incoming call or
the next 10 minutes.
– Fax, until off—Force the phone into fax mode until the phone is turned off.
User Guide for the Kyocera 3225 Phone 89