Setting The Phone To Receive Data Or Faxes - Kyocera SLIDER SE44 User Manual

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the
system sending the information. To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone from voice mode to data/fax
mode.
To purchase a cable, contact your service provider; purchase one from us at
(800) 349-4188 (U.S.A. only) or (858) 882-1410; or online at
www.kyocera-wireless.com.
Note: You cannot receive voice calls while the phone is in data/fax mode.
1. Connect the phone to the laptop or PC.
2. Set the Com Speed. (See
Select Menu → Settings → Network → Data/Fax Calls.
3.
4. Press to select an option:
– Voice Only—Allow only voice calls.
– Fax, next call or Data, next call—Set the phone to fax mode or data mode
for the next incoming call or the next 10 minutes.
– Fax, until off or Data, until off—Force the phone into fax mode or data mode
until the phone is turned off.
70
"Connecting to a laptop or a PC" on page 69.)
Customizing Your Phone