Play With Bluetooth Device - VIETA VH-IS1000 User Manual

View the iPod/iPhone/iPad video
Using iPod video socket
FM ANT OPTICAL MP3 LINK
iPod VIDEO
Connect the iPod/iPhone/iPad composite video
cable to:
- the iPOD VIDEO socket on this unit.
- the video input socket on the TV.
Note:
Some iPods need to set the TV out setting to "ON",
then could View the video.
Charge the iPod/iPhone/iPad
The docked iPod/iPhone/iPad begins to charge
as soon as the unit is connected to AC power.
Remove the iPod/iPhone/iPad
1. Pull the iPod/iPhone/iPad out of the dock.
2. Raise up the buckle
module to original position
18
AC~
iPod VIDEO
VIDEO IN
1
, and rotate the dock
2
.

Play With Bluetooth Device

You can listen to music from a Bluetooth-enable
device via this player.
Pair the Bluetooth-enabled devices
The first time you connect your Bluetooth device
to this player, you need to pair your device to this
player.
Note:
- The operational range between this player
and a Bluetooth device is approximately
8 meters.
- Before you connect a Bluetooth device to
this unit, familiarize yourself with the
Bluetooth capabilities of the device.
- Compatibility with all Bluetooth devices is
not guaranteed.
- Any obstacle between this unit and a
Bluetooth device can reduce the
operational range.
- Keep this player away from any other
electronic device that may cause
interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to Bluetooth, Display
panel shows "BLU T", then show "NO BT"
(if there's no Bluetooth device connected).
BF
3. Press and hold "
control for seconds to activate Bluetooth
pairing mode, display panel shows "PAIR".
4. Search for Bluetooth device with your device.
5. Select "BLUEPORT" in the pairing list.
6. Enter default password "0000", if the pairing
succeeds, display panel shows "BLU T" again.
7. To disconnect connection, turn off the
Bluetooth function on your device or switch
the player to other source.
Tip
- If there's a connection exist, hold and press
BF
" / " button on remote control for
seconds will re-activate the pairing mode,
the connection will be interrupted.
- If there's no other Bluetooth device pair with
this player in two minutes, the player will
recovery previous connection.
- The player will also be disconnected when
your device is moved beyond the operational
range.
- If you want to reconnect your device to this
player, place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected with the player.
- If they are connected, display panel shows
"BLU T".
Sound Tower for iPad/iPhone/iPod
/ " button on remote