ClearSounds A600 Operating Manual page 64

Alarm
█
You can set an alarm on the handset (the alarm also supports
the snooze function). To set the alarm:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press the Select soft key to select Alarm and the display
will show the current set-up.
4. Press up
press the Select soft key. If you select On, the display
asks you to enter the time in HH:MM.
5. Use the keypad to enter the time (If your time is set
to the 12 – Hour format, you will still need to enter the
time in the 24 – Hour format. Press the Next soft key.
6. The display shows Snooze On/Off. Press up
to select Snooze On or Snooze Off and then press
the Save soft key.
7. When the alarm sounds, press any key to switch it off. If
you have selected Snooze On, the alarm will ring every
11 minutes. To stop the snooze alarm, you must press
to prevent the snooze function from continuing. This
automatically switches the Snooze function to Snooze
Off. You will need to re-select Snooze On if you want to
turn that function back on for the next time the alarm is
set to go off.
█ Torch
If you turn this feature on, the visual phone ringer light will
remain lit and can be used as a light. To turn this feature on/
off, in standby mode, press and hold
on/off.
or down
or down
64 – ENGLISH
to scroll to HS Settings and
to select On or Off and then
until the light turns
or down