Tam Reset - ClearSounds A600 Operating Manual

After you record the Announce1/Announce2, press
to finish. The system will play back the announcement
you have recorded.
NOTE: It is best to stop playing messages before hanging up
the phone.
Reminder: Your answering machine must be turned ON in
order to use remote access.
█

TAM Reset

This function allows you to reset the TAM settings to the initial
factory settings. To reset the TAM:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press down
the Select soft key.
3. Press up
then press the Select soft key. You will be prompted
to enter the PIN.
4. Enter the PIN (the default PIN is 0000) and then
press the Reset soft key. If the PIN is validated, all
TAM settings will be reset to the initial factory settings,
otherwise the settings will remain.
5. After resetting, the handset will return to standby
mode.
PHONEBOOK OPERATION
Reminder: Press the Back soft key from any menu to return
to the previous screen. To return to the main screen, press
. Otherwise, after 1 minute, the phone will automatically
return to the main screen from any menu if no key is pressed.
to scroll to TAM Setting and then press
or down
57 – ENGLISH
to scroll to TAM Default and
or