ClearSounds A600 Operating Manual page 22

█ Using your Handset Speakerphone
The handset has a built-in speakerphone. When using the
speakerphone, you can enjoy the convenience of hands-free
conversation. To activate the speakerphone
In standby mode:
1. Press
icon will appear on the LCD.
2. Press
handset mode. The
LCD.
During a call:
1. Press
will appear on the LCD.
2. Press
handset mode. The
LCD.
To adjust the volume, press the Vol+ or Vol- keys on the side
of the handset or press up
key. You may also pre-select your speakerphone volume by
following the instructions in Audio Setup, found on page 33.
For optimal speakerphone performance, avoid the following:
• Areas with high background noise (The microphone might
pick up these sounds and prevent the speakerphone from
going into the receiving mode when you finish talking).
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or
next to a cabinet, which can generate an echo effect.
█ Ringer Setting
Audible Ringer
You can adjust the ringer of your phone as high as +85 dB
and you can select separate ring tones for external calls (EXT)
twice to turn the speakerphone on. The
to turn the speakerphone off and switch to
to turn the speakerphone on. The
to turn the speakerphone off and return to
22 – ENGLISH
icon will disappear from the
icon will disappear from the
or down on the navigation
icon