Phonebook; Using Pause - ClearSounds A600 Operating Manual

4. The display shows "Name?". Enter the name you want
to use and then press the Next soft key to confirm. The
display shows "Number?". Enter the desired number
(up to 24 digits) and then press the Next soft key.
5. Press up
Melody 10 and then press the Save soft key. If you want
to set a VIP number, you should select a special Melody
ring tone for it. This ring tone should be different than
the EXT Ring tone you have set.
6. Repeat if necessary.
NOTE: If you make a mistake while entering a name or a
number, use the Erase soft key to correct it. Each time you
press this key, the last digit is deleted. To clear all digits,
press and hold the Erase soft key.
█ Using a Pause
M1-M4 memory dial entry)
You can insert one 3 second pause into dialing or memory
storage in order to access custom and telebanking services, long
distance, calling cards, etc. Press right
key at the desired point in the number to insert the pause and
the letter P will appear at the pause entry.
█ Viewing the Phonebook Entries
1. In standby mode, press down

phonebook.

2. Press up
the desired entry is displayed.
or down
(used when entering a phonebook entry or
or down to scroll through the list until
59 – ENGLISH
to select from Melody 1 –
on the navigation
to enter the