Download Print this page

Troubleshooting - Amcor HD 2000HT Instruction Manual

Advertisement

TROUBLESHOOTING

If the product is used according to this manual you should enjoy trouble free use.
In cases of difficulty please check the following points before contacting the dealer
or Amcor help line.
Symptom
Product does not
start
Water is leaking
outside of the
water tank
Reduced water
extraction
Not collecting
water
Check
Is the "power" light on?
Is the "water full" light
on?
Is the humidistat set to a
high relative humidity?
Has the unit been run-
ning in cold temperatures
under 5°C?
Has the container been
removed for emptying
immediately after the unit
was running?
Is the humidistat set to a
high relative humidity?
Are the filters blocked?
Is the air already relatively
dry?
Is the unit running in a
cold room?
Is the "water full" light
[9] on?
Is the humidistat set to a
high relative humidity?
Action
Make sure the unit is plugged in to a
live mains socket.
Make sure the container is empty of
water and fitted
Select a lower humidity setting [5] or
continuous running mode [4].
Only run the unit in a heated space
above 5°C.
Wait a few minutes to allow the
condensation within the unit to flow
into the container after switching
off the unit and before removing the
container.
Select a lower humidity setting [5] or
continuous running mode [4].
Washable air filter may need clean-
ing. Activated carbon filter may need
cleaning or replacing.
Select a lower humidity setting [5] or
continuous running mode.
Ensure that the unit is operating in a
heated space above 5°C.
Make sure the container is empty of
water and fitted properly in position.
Select a lower humidity setting [5] or
continuous running mode [4].
GB
11

Advertisement

loading

This manual is also suitable for:

Hd 3000ht