Bypassing A Zone; Bypass Recall Feature; One-Touch Bypass Programming - Paradox MAGELLAN MG5000 User Manual

Bypassing a Zone

Bypassing a zone allows you to ignore (deactivate) specified zones the next time the system is armed. For
example, you may wish to bypass certain zones when workers are renovating part of your home. Once the
system is disarmed, the bypass entries are erased. When zones are bypassed, the [
Zone bypassing can also be activated by using One-Touch Bypass Programming (see page 15). If One-Touch
Bypass Programming is enabled, press the [
remove the Bypass feature from a zone, in step 3 enter the zone number again or press [
current entries. Press [
How do I bypass zones?
1 Press the [ ] key.
BYP
2 Enter [ ]. The [
USER CODE
3 Illuminate the number(s) corresponding to the zone(s) you want to bypass by entering the zone number.
Solid on = Zone open, Flash = Zone bypass, Off = Zone closed, not bypassed.
4 Press the [ ] key to save and exit. Press [
ENTER

Bypass Recall Feature

After disarming the system, bypass entries are erased. The Bypass Recall feature reinstates the previous
bypass entries saved in memory. This eliminates the need to manually re-program the bypass entries every time
you arm your system.
How do I recall bypass entries?
1 Press the [ ] key.
BYP
2 Enter your [
USER CODE
3 Press the [ ] key.
BYP
4 Press the [ ] key.
ENTER
One-Touch Arming
One-Touch arming allows you to arm the system without using a user code. This feature must be enabled by
your installer. If One-Touch Arming is programmed, you can increase the security level of your system (from
Disarm Stay Arm
One-Touch Regular Arming
Press and hold the [
ARM
this feature to allow specific individuals like service personnel (e.g. cleaners) to arm without giving them access
to any other alarm system operations. See Regular Arming on page 14.
One-Touch Stay Arming
Press and hold the [
STAY
One-Touch Sleep Arming
Press and hold the [
SLEEP

One-Touch Bypass Programming

Press and hold the [
BYP
Fast Exit
When the system is already Stay or Sleep armed: this feature will allow you to exit already armed premises and
keep the system armed. Press and hold the [
the system will switch to its previous arming mode.
Magellan / Spectra SP
BYP
] + [ ] to delete bypassed zones.
CLEAR ENTER
] key will flash. Press [
BYP
].
Sleep Arm Full Arm) without a code. See Figure 1 below.
] key to arm all zones in the partition. If partitioned, keys [1] & [2] will flash. You can use
] key to arm the perimeter (no Stay zones). See Stay Arming on page 14.
] key to arm all zones not defined as Sleep zones. See Sleep Arming on page 14.
] key to access Bypass programming mode. See Bypassing a Zone on page 17.
OFF
] key for three seconds to enter bypass programming. To
] to bypass all open zones or go to step 3.
ENTER
] twice to exit without saving.
CLEAR
] key for to start the exit delay. After the exit delay has elapsed,
] key will illuminate.
BYP
] to erase all
CLEAR
15