3.1.1
Correct wiring (with Shield)
3.1.2
Correct wiring (without Shield)
When the shield has a break or is NOT connected, the Shield icon is NOT lit. This cable
seems to pass, but for PROFINET and other Industrial Ethernet systems, this cable should NOT be
approved!
3.1.3
Wire break
If a wire break is detected, the affected pins will be blank and the "Open" icon will be ON (blinking).
PN1-Manual-EN.docx
_______________________________________________
Version 1.2.1 – June 2014
PROFINET Cable Tester – User Manual
© PROCENTEC 2014 - Copyright - all rights reserved
Page 14 / 32