Correct Wiring (With Shield); Correct Wiring (Without Shield); Wire Break - Procentec PROFINET User Manual

3.1.1

Correct wiring (with Shield)

1
2
3
6
sh
3.1.2

Correct wiring (without Shield)

When the shield has a break or is NOT connected, the Shield icon is NOT lit. This cable
seems to pass, but for PROFINET and other Industrial Ethernet systems, this cable should NOT be
approved!
1
2
3
6
sh
3.1.3

Wire break

If a wire break is detected, the affected pins will be blank and the "Open" icon will be ON (blinking).
1
2
3
6
sh
PN1-Manual-EN.docx
1
2
3
6
sh
1
2
3
6
sh
1
2
3
6
sh
_______________________________________________
Version 1.2 – 27 April 2009
PROFINET Cable Tester – User Manual
Data 2
Shield
Pass ID 1
1 2 3 6
1 2 3 6
Data 2
Pass ID 1
1 2 3 6
1 2 3 6
Data 2
Shield
Open
1 2 3 6
3 6
© PROCENTEC 2009 - Copyright - all rights reserved
Page 14 / 32