Table of Contents
Advertisement
1 Product Description
PN1, the first handheld PROFINET cable tester is an
essential tool to verify the condition of the PROFINET
cable after assembly and installation.
It is a robust tester which has been especially designed for
PROFINET and suitable for industrial environments. With just
1 key-press the test result is directly displayed and
continuously updated.
If a cable did not pass the test, it will clearly indicate what the
problem is and which wires/pins are affected. This product
does not require special skills. It is easy to use and gives the
technician quick and understandable feedback about the
quality of the wiring. It can also be utilized on all other
Ethernet networks with 4-wire and 8-wire shielded cables.
This outstanding tool that fits in your pocket will boost the
efficiency of installers and maintenance technicians.
1.1 Features
Suitable for 4- and 8-wire PROFINET and regular
Ethernet cables (CAT6, CAT-5E, CAT-5, CAT-4 and CAT-3).
Suitable for straight and 90° metal or plastic PROFINET plugs.
Tests cable shielding!
Detects short circuits, wire breaks, swaps, miswiring and split pairs.
Large LCD clearly indicates the test results.
150 hours on one 9 V battery.
Operating temperature: 0 to 50 °C.
Just 1-key-press to start continuous testing.
It can also test telephone and coax cable.
1.2 Application areas
Cable testing during installation phase.
Commissioning.
Education.
PN1-Manual-EN.docx
_______________________________________________
Version 1.2.1 – June 2014
PROFINET Cable Tester – User Manual
© PROCENTEC 2014 - Copyright - all rights reserved
Page 7 / 32
Advertisement
Table of Contents
