Advertisement
Quick Installation for the DataPort External Modem
A. Get your DataPort modem ready:
Your modem needs a serial cable to connect it to your
computer. One end must
have a 25-pin plug,
and the other end must
have a socket that
matches the
modem port on
your computer.
This is a 25-pin
or a 9-pin
connector.
Plug the
transformer
at the other end
of the power cord
into a 110 Vac
power outlet.
Turn on your
modem and
your PC.
B. Get your Quick Link II Fax software ready:
1. Insert the Quick Link II Fax
2. From the Microsoft
and then type a:install (or b:install, if you are using drive B) at the
command line. (Under DOS, type at the C:\>prompt.) Press Enter.
3. Follow the instructions the install program displays on your screen.
Let the Auto Detect feature determine which COM port you are using.
C. Get yourself ready!
You are now all set to explore a world of information and entertainment.
Use Quick Link II Fax to send and receive faxes, or to dial Bulletin Board
Systems and friends. Subscribe to online services like CompuServe
GEnie
, and America Online
™
people with computers and fax machines.
If you have questions about your DataPort Express modem, call 800-237-0016.
Plug the serial
cable into
your modem.
Plug the
small power
connector
into the
modem
jack marked
POWER.
disk into your disk drive.
™
Windows
Program Manager, select File
®
™
. Connect with a few of the millions of
®
Plug the
serial cable
into the
serial port
of your PC.
Plug your phone
into the modem jack
marked PHONE.
Take one end of the line cord
(included with your modem)
and plug it into the modem
jack marked LINE.
Take the other end of the
line cable and plug it into
your telephone wall outlet.
Run,
,
®
Advertisement
