Main Board Block - Sony XM-N502 Service Manual

3-3.

MAIN BOARD BLOCK

1 three screws
(+P, TT, B-TYPE, 3
hole
boss
3-4. MAIN BOARD
2 front panel
1 screw
(+P, TT, B-TYPE, 3
2 screw
(+B, TT, B-TYPE, 3 L)
L)
1 three screws
– Bottom view –
Note: When installing the front panel,
check that RV301 must be stay
in the center of the hole.
OK NG
RV301 RV301
front panel front panel
L)
1 screw
(+P, TT, B-TYPE, 3 L)
1 screw
(+P, TT, B-TYPE, 3 L)
(+P, TT, B-TYPE, 3 L)
1 three screws
(+P, TT, B-TYPE, 3
3 MAIN board block
Note 2: When installing the MAIN board block,
align two holes and two bosses.
hole
Note 1: Please spread a sheet under a unit
not to injure heat sink (main).
boss
RV301
1 screw
(+P, TT, B-TYPE, 3 L)
XM-N502
L)
MAIN board
sheet heat transfer S
3 sheet heat transfer S
4 MAIN board
5