SERVICE MANUAL
Ver. 1.0 2013.07
Circuit system
Inputs
Input level adjustment range
Outputs
Speaker impedance
Maximum output
Rated output
(supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 % THD)
9-893-784-01
Sony Corporation
2013G33-1
©
2013.07
Published by Sony Techno Create Corporation
All manuals and user guides at all-guides.com
SPECIFICATIONS
OTL (output transformerless)
circuit
Pulse power supply
RCA pin jacks
High level input connector
(E and Indian models only)
0.3 – 6 V (RCA pin jacks)
2.8 – 12 V (High level input)
(E and Indian models only)
Speaker terminals
2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging
amplifier)
4 Speakers: 170 W × 4 (at 4 Ω)
3 Speakers: 250 W × 2 (at 2 Ω) +
500 W × 1 (BTL, at 4 Ω)
2 Speakers: 500 W × 2 (BTL, at
4 Speakers:
70 W × 4 (at 4 Ω)
85 W × 4 (at 2 Ω)
2 Speakers: 175 W × 2 (BTL, at
XM-N1004
Canadian Model
Frequency response
5 Hz – 50 kHz (
dB)
Harmonic distortion
0.05 % or less (at 1 kHz, 4 Ω)
Low-pass filter
80 Hz, 18 dB/oct
High-pass filter
80 Hz, 12 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
at rated output: 36 A
(4 Ω, 70 W × 4)
Remote input: 1 mA
Dimensions
Appr
(w/h/d) not incl. projecting parts
and controls
Mass
Approx. 2.7 kg not incl.
accessories
Supplied accessories
Mounting screws (4)
High level input cord (1)
(E and Indian models only)
Protection cap (1)
Design and specifications are subject to change
without notice.
STEREO POWER AMPLIFIER
AEP Model
UK Model
E Model