Using The Timer Menu - Sony Wega Trinitron KV-20FV12 Operating Manual

Using the Timer
To access the Timer menu, refer to the following steps:
To Display
Current Time
Timer 1 and
Timer 2
Scheduled
viewing


You must set the Current Time before you can use Timer 1 and Timer 2.


You can set the Timer to ON, OFF, or Set. Once the timer is set, you can turn it
on or off without having to go through the settings.
Daylight
Saving


When you perform Auto Program, all Timer 1 and Timer 2 settings will be
cleared.


Any loss of power will cause Current Time, Timer 1 and Timer 2 settings to be
cleared.
Menu
To Highlight
Timer
Timer 1: Set
Timer 2: Set
Current Time
Daylight Saving: NO
Move
f
1 Press F or to select the current time, then press
(If you are in Daylight Saving time, be sure to set the
Daylight Saving mode in "YES")
f
2 Press F or to enter the correct time, then press
3 Press to exit the menu.
With the menu open, set cursor on Timer 1 or Timer 2:
f
1 Press F or to select Timer 1 or Timer 2, then press
f
2 Press F or to enter your time and channel of
preference, then press
3 Press to exit the menu.
YES: Select in spring to compensate for Daylight Saving.
NO: Select in fall at the end of Daylight Saving.
:
AM
MENU
Select End
.
Using the Menus
To Select
.
.
.
31