Sony Wega Trinitron KV-20FV12 Operating Manual page 20

Operating Instructions
TV, Satellite Receiver, and VCR
Satellite
antenna
cable
1
4
SATELLITE IN
AUDIO R A UDIO L VIDEO
LINE OUT
Satellite receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on
the satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the
IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your
VCR to the VHF/UHF jack on your TV.
4
Using Audio/Video cables (not supplied), connect AUDIO and
VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on
your VCR.
5
Using Audio/Video cables (not supplied), connect AUDIO and
VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV.


To view from the satellite receiver or VCR, select the video input to which
your satellite receiver or VCR is connected by pressing
control.
8
VCR
VHF/UHF
AUDIO R A UDIO L VIDEO
IN
OUT
LINE IN
LINE OUT
5
Rear of TV
From
cable/
antenna
2
VHF/UHF
IN
OUT
3
on the remote
Video (yellow)
Audio L (white)
Audio R (red)