Table of Contents
Advertisement
Digital air- conditioner controller KR- 454
S17
S18
S19
S20
S6
INDUSTRIE-ELEKTRONIK
Setting the setpoint for temperature upper deck
Setting- and display range from 18°-28° C
The actual setpoint of the upper deck is displayed by a short
pressing (press and release) of keys S17 or S18.
Display => f.ex. " 20 "
You can change the setpoint with keys S17 and S18 in 1°C -steps
per key pressure.
The actual setpoint is displayed after releasing the corresponding
key.
If you don't press the keys for further 5 sec. the value is stored and
the display goes back to its former status.
Setting the setpoint for temperature lower deck
Setting- and display range from 18°-28° C
The actual setpoint of the lower deck is displayed by a short
pressing (press and release) of keys S19 or S20.
Display => f.ex. " 20 "
You can change the setpoint with keys S19 and S20 in 1°C -steps
per key pressure.
The actual setpoint is displayed after releasing the corresponding
key.
If you don't press the keys for further 5 sec. the value is stored and
the display goes back to its former status.
AUTOMATIC MODE
The temperature control system of the passenger compartment is
switched on automatically after starting the engine. The LED of
key S6 flashes. You can switch off the Automatic mode by
pressing key S6. Automatic control is only possible with the engine
Control and regulating systems for vehicle air conditioning
D-71691 Freiberg a.N.,
Phone: +49 7141 / 68877 - 0
Issue: October 1998 - Copyright (C) BADER GmbH - Alterations reserve
Siemensstr.21
Fax: +49 7141 / 68877 - 39
page:
9
of:
42
04541530.SDW
Hide quick links:
Advertisement
Table of Contents
