Special Functions - Bader KR-454 Operating Instructions Manual

Digital air- conditioner controller KR- 454

5. SPECIAL FUNCTIONS

5.1 INTENSITY CONTROL OF THE LED-DISPLAYS
INDUSTRIE-ELEKTRONIK
The KR-454 air-conditioner controller features an intensity control
which dims the display when the vehicle's headlights are on. The
driver himself can set the intensity in 2 stages.
The intensity can be set in "DIAGNOSTIC MODE" with the
ignition switched off:
Press keys S6 and S9 simultaneously.
After the program version and the contents of the error memory
have been shown on the display
you can call the intensity control by pressing S1 und S2
simultaneously.
You will now see the following f.ex. on
the display
You can store this value with key S14 after setting the intensity.
You quit DIAGNOSTIC-MODE again by pressing keys S6 / S9.
If you now drive with your headlights on, the display is dimmed to
the set intensity value.
If you intend to drive with your headlights on under daylight
conditions (e.g. in Sweden), you will not want the display dimmed.
You can switch the intensity control on and off even when on the
move by pressing keys S1 and S2 simultaneously.
Control and regulating systems for vehicle air conditioning
D-71691 Freiberg a.N.,
Phone: +49 7141 / 68877 - 0
Issue: October 1998 - Copyright (C) BADER GmbH - Alterations reserve
This display means intensity set to 50%.
This value can be varied from 50% to
100% with keys S12 and S13.
Siemensstr.21
Fax: +49 7141 / 68877 - 39
page: 18
of: 42
04541530.SDW