Calling And Clearing The Contents Of The Error Memory; List Of Error Messages - Double-Decker Coach - Bader KR-454 Operating Instructions Manual

Digital air- conditioner controller KR- 454

4.2 CALLING AND CLEARING THE CONTENTS OF THE ERROR MEMORY

S6 S9
S12 S13
4.3 LIST OF ERROR MESSAGES - DOUBLE-DECKER-COACH
Error 1
Error 3
Error 4
Error 5
INDUSTRIE-ELEKTRONIK
These errors are displayed again each time you switch on the
ignition in order to indicate the defect to you. The contents of the
error memory must be cleared manually when the error has been
rectified.
The contents of the error memory can be called by pressing keys
S6 and S9 simultaneously with the ignition switched off.
You will first see the program version of the unit on the display
(e.g. 1.10).
You will then see the number of errors detected, shown by an "A"
and a consecutive number.
You can then "page forwards and backwards in the error memory
with keys S12 and S13.
You can clear the contents of the error memory by pressing
both keys simultaneously.
You will then see "A 00" on the display.
If there is still an error in the system (e.g. sensor discontinuity),
this error message will be displayed again immediately.
Working-hour meter not set at 0
Short circuit, outside sensor
Discontinuity, -"-
Short circuit, passenger compartment sensor lower deck
Control and regulating systems for vehicle air conditioning
D-71691 Freiberg a.N.,
Phone: +49 7141 / 68877 - 0
Issue: October 1998 - Copyright (C) BADER GmbH - Alterations reserve
Siemensstr.21
Fax: +49 7141 / 68877 - 39
page: 15
of: 42
04541530.SDW