Table of Contents
Advertisement
4.1 SYSTEM FEATURE DESCRIPTIONS
ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up
from a call. This account code will appear in the SMDR printout for that call record.
Keyset users may enter this code using an account (ACCT) key without interrupt-
ing a conversation. Single line telephone users must temporarily interrupt the call
by hook-flashing and dialing the feature access code. Account codes can be up to
12 digits long.
FORCED
When forced, they are always verified from a system list of 500 entries. Account
codes are always printed on the SMDR report. They can contain digits 0–9 only.
VOLUNTARY
Users may elect to enter an account code for any call. They can contain digits 0–9,
3 and #. There is no limit to the number of voluntary account codes because they
are not stored in system memory.
ALL CALL VOICE PAGE
Users can page all internal and all external paging zones at the same time by
dialing the All Page code. Keysets may be restricted from making or receiving
pages in system programming. A maximum of 99 keysets can be programmed to
receive page announcements.
ATTENTION TONE
To get your attention, a brief tone precedes all page announcements and intercom
voice calls. There are separate programmable duration timers for page and voice
announce tones.
AUTHORIZATION CODES
Authorization codes are used to give permission to make a call. A maximum of 250
four digit authorization codes can be either forced or voluntary. When used, autho-
rization codes will automatically change the dialing station's class of service to the
level assigned to the authorization code. Authorization codes may be programmed
to print or not print on SMDR.
FORCED
When a station is programmed for forced authorization, the user must always enter
this code before dialing is allowed. The dialed authorization code is verified from
the system list of 250 authorization codes.
VOLUNTARY
Any station user can always enter an authorization code before they begin dialing.
The dialed authorization code is verified from the system list of 250 authorization
codes.
4.1.2
CONTENTS
Advertisement
Table of Contents
