4. Peel off the protective film on the DTV tuner
box and then insert the tuner box into the
slot as shown. Pay attention to the direction
of the tuner box when inserting.
5. Push the DTV tuner box all the way into the
slot.
6. Use the supplied screw and a suitable
screwdriver to secure the DTV tuner box on
the display.
7. There are two connectors on the DTV tuner
box: one for aerial antenna input and the
other for loop-through output of signals to
other devices.
Connect the aerial antenna (to be purchased
separately) cable to the aerial antenna input
connector. If necessary, you can also connect
other devices to the loop-through output
connector.
Next, please follow the instructions of
and storing digital TV channels and radio
stations" on page 4
to scan and store digital TV
channels and radio stations available in your
area.
"Scanning
Loop-through
output to
other devices
Installing the DTV tuner box
Aerial antenna
input
3