Installing The Dtv Tuner Box - BenQ VB Series Installation And Operation Manual

Installing the DTV tuner box

Before installing the DTV tuner box, please pay attention to the following to
ensure the safety of installation:
• Wear suitable protective insulation gloves to prevent any possibilities of
injuries.
• Peel off the protective film on the DTV tuner box prior to installation.
• Be sure to turn the display power off and disconnect the power cord from the
power outlet. Turn the power of the devices off and remove all connected
signal cables if the display is connected to other devices.
• Make sure that there is sufficient space around the display for performing the
installation. If not, it is suggested that you move the display to a suitable place
to perform installation, and then move it back to its original location when
installation is completed.
1. Turn the display to reveal its left side and
locate the DTV tuner box slot (as shown in
the illustration).
2. Use a suitable screwdriver to remove the
screw that secures the DTV tuner box slot
cover.
3. Remove the DTV tuner box slot cover as
shown.
2
Installing the DTV tuner box
DTV tuner box
slot