Table of Contents
Advertisement
Setup
Adding new digital TV channels and radio stations
If there are new digital TV channels and radio stations available in your area
after the initial installation of this DTV tuner box, you can perform the
following steps to add them to the channel memory.
1. Press
電視 / 數位電視 (TV/DTV)
mode, and then press
OSD menu.
2. Press
+
or
3. Press
or
Digital Channels
press
OK
4. A message displays. Press the
to continue.
5. The DTV tuner box will start scanning available digital TV channels and
radio stations and save them to the memory. Please be patient as this may
take some time.
The number of channels and stations scanned and stored is dependent
upon that found in your area.
6. When scanning and storing is complete, a
message that shows the number of new
channels and stations added will display.
Press the
目錄 (Menu)
-
to select
TV
, and then press
Add New
to select
, and then
.
Red button
to confirm.
on the remote control to enter the DTV
on the remote control to display the
OK
.
DTV
TV/Radio
TV Guide >
Channel List >
Channel Editor >
Replace Existing Digital Channels >
Add New Digital Channels >
Add New Digital Channels
Please ensure that the antenna is well connected
Red button
before continue.
Quick Scan：533-605MHz
Continue
Add New Digital Channels
Searching complete.
02 TV channels and 01 Radio channels added.
OK
TV
回上頁
Cancel
Setup
9
Advertisement
Table of Contents
