Listening To Digital Radio Broadcasts; Changing Radio Stations Sequentially; Selecting A Station Directly; Returning To The Previous Listened Station - BenQ VB Series Installation And Operation Manual

Listening to digital radio broadcasts

If radio broadcasts are available in your area, you can also use the DTV tuner
box and your display to listen to digital radio.
If the DTV tuner box is installed for the first time, please refer to
storing digital TV channels and radio stations" on page 4
the storing the digital radio stations in your area.
1. Press 電視 / 數位電視 (TV/DTV)
mode.
目錄 (Menu)
2. Press
3. Press + or -
4. Press or
5. Press 目錄 (Menu)
theme screen will display:
In digital radio mode, you can perform the following operations:

Changing radio stations sequentially

Press 頻道 (Channel)
backward.
Currently (October 2007) there is only one digital radio station available in Taiwan.

Selecting a station directly

Press corresponding channel selection buttons on the remote control. For
example, to select station 8, press

Returning to the previous listened station

You can press 返回 (Recall)
current and previous radio station.

Adjusting the volume

音量 (Volume)
• Press
• Press 音量 (Volume) -

Mute setting

Press 靜音 (Mute)
Press 靜音 (Mute)
sound level.
8
Enjoying digital TV and radio
to display the OSD menu.
to select TV , and then press
to select TV/Radio , and then press
to close the OSD menu. The following digital radio
/ to sequentially change stations forward or
0 ,
on the remote control to toggle between the
+ on the remote control to increase volume.
on the remote control to decrease volume.
on the remote control to turn off the sound temporarily.
once more, or press
to complete scanning
on the remote control to enter the DTV
OK .
+ or
8 . To select station 10, press
音量 (Volume) +
"Scanning and
- to select Radio .
1 , 0 .
or + to restore the