Acer X112H User Manual page 16

6
# Icon
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Downloaded From projector-manual.com Acer Manuals
Function
VGA Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
SD/USB A No function.
LAN/WiFi No function.
HDMI/DVI To change source to HDMI/MHL. (no DVI function)
SOURCE Changes the active source.
HIDE Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
KEYSTONE Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
MENU •
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
To pause the screen image.
FREEZE
MEDIA_HOME No function.
MEDIA_SETUP No function.
VIDEO To change source to COMPOSITE VIDEO.
COMPONENT No function.
PgUp/PgDn For computer mode only. Use this button to select the next or
previous page. This function is only available when USB Ctrl
connector (mini type B) is connected to a computer via a USB
cable.
S-VIDEO To change source to S-Video.
USB B For USB control and firmware upgrade.
Note: Functions vary depending on model definition.
Description