Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Acer X115 Series
Summary of Contents for Acer X115 Series
- Page 1 Acer Projector X115/ X115H/ X125H/ X135WH/ H6517ABD/ D602/ D602D/ D612D/ D622D/E145F/ EV-S62/ EV-S62H/EV-X62H/ EV-W62H/ HE- 801K/ V31S/ V32S/ V32X/ V32W/ AS304/ AS314/ AX314/ AW314/ D600+/ D600D+/ D610D+/ D620D+/ X114PH/ X124PH/ X134PWH Series User's Guide...
- Page 2 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Model number: _________________________________...
- Page 3 Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
- Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.
- Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
- Page 6 Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.
- Page 7 For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Properly.”...
-
Page 8: Precautions
viii First things first Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. -
Page 9: Table Of Contents
Information for your safety and comfort First things first viii Usage Notes viii Precautions viii Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image... - Page 10 LED & Alarm Definition Listing Cleaning and replacing the dust filters Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices...
-
Page 11: Introduction
Full/4:3/16:9/L.Box aspect ratio supported • Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D supported and nVidia 3DTV Play Ready • Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images • High brightness and contrast ratio •... -
Page 12: Package Overview
Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable Remote control 2 x Batteries Security card (option) User’s guide Quick start guide... -
Page 13: Projector Overview
Projector Overview Projector Outlook Front / upper side Description Description Air outlet Air inlet Lamp cover Remote control receiver Control panel Projection lens Power button 10 Lens cap Zoom lever 11 Tilt adjusting wheels Focus ring... - Page 14 Right / Rear side <Right side> <Rear side> Description Description Mini USB Ctrl connector (for firmware RS232 connector upgrade and page up/page down function) PC analog signal/HDTV/component Power socket video input connector HDMI connector Kensington lock port Security bar S-Video input connector Audio input connector Composite video input connector Note: Functions vary depending on model definition.
-
Page 15: Control Panel
Control Panel Icon Function Description POWER POWER Power Indicator LED LAMP LAMP Lamp Indicator LED TEMP TEMP Temp Indicator LED Automatically synchronizes the projector RESYNC RESYNC to the input source. SOURCE SOURCE Changes the active source. See the contents in "Turning the Projector POWER On/Off"... -
Page 16: Remote Control Layout
Remote Control Layout SOURCE MEDIA SETUP MODE HIDE ZOOM RATIO FREEZE Model No:E-26281 Icon Function Description Infrared Sends signals to the projector. transmitter POWER Refer to the "Turning the Projector On/Off" section. Press "3D" to select 3D models. SOURCE Changes the active source. SOURCE Press "MODE"... - Page 17 Icon Function Description Four Use up, down, left, right buttons to select items or make directional adjustments to your selection. select keys Pre./Rewind No function. Enter/ Play/ No function. Pause Back/Stop No function. Next/Fast No function. forward KeyPad 0~9 Press "0~9" to input a password in the "Security" OSD. For computer mode only.
-
Page 18: Getting Started
Getting Started Connecting the Projector DVD player, Set-top Box, HDTV receiver HDMI D-Sub RS232 R B G HDMI HDTV adapter D-Sub RS232 Video output S-Video output Description Description Power cord 3 RCA component cable S-Video cable VGA to component/HDTV adapter Composite video cable VGA cable RS232 cable... - Page 19 Note 1: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note 2: Functions vary depending on model definition. Note 3: USB cable needs powered extender if the length is over 5 m.
-
Page 20: Turning The Projector On/Off
Turning the Projector On/Off Turning on the Projector Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing "Power" button on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player, etc.). -
Page 21: Turning The Projector Off
Turning the projector off To turn the projector off, press and hold the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. -
Page 22: Adjusting The Projected Image
Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel... -
Page 23: How To Optimize Image Size And Distance
How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA/XGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 46"... - Page 24 • WXGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 54" and 60". Note: Remind as below figure, the space of 91 cm height is required when located at 2.0 m distance. Height: 91 cm from base to Height:...
- Page 25 • 1080p series If the projector is 2 m from the screen, good image quality is possible for image sizes between 56" and 61". Note: Remind as below figure, the space of 88 cm height is required when located at 2 m distance. Height: 88 cm from base to top of image...
-
Page 26: How To Get A Preferred Image Size By Adjusting Distance And Zoom
How to get a preferred image size by adjusting distance and zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • SVGA/XGA series To obtain an image size of 50" set the projector at a distance 2.0 m and 2.2 m from the screen. - Page 27 • WXGA series To obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m from the screen. 60" Desired image size Height: 91 cm from base to top of image 2.0 m 2.2 m Desired Distance Desired Image Size Distance (m)
- Page 28 • 1080p series To obtain an image size of 60" set the projector at a distance 1.97 m and 2.2 m from the screen. 60" Desired image size Height: 87 cm from base to top of image 1.97 m 2.2 m Desired Distance Desired Image Size Distance (m)
-
Page 29: User Controls
The new settings will be saved automatically upon exiting the menu. Push the MENU button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition. -
Page 30: Onscreen Display (Osd) Menus
Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel. -
Page 31: Color
Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing video in a bright environment. • Game: For game content. •... - Page 32 Color Mode Use this function to choose CT1, CT2 (Native), CT3, User mode. Temperature R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. R Bias Adjusts the red bias for color temperature optimization.
-
Page 33: Image
Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. - Page 34 H. Position • Press to move the image left. • Press to move the image right. V. Position • Press to move the image down. • Press to move the image up. Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer’s graphics card.
-
Page 35: Setting
Setting Source Lock When Source Lock is turned "Off", the projector will search for other signals if the current input signal is lost. When Source Lock is turned "On", it will "lock" the current source channel unless you press "Source" button on the remote control for the next channel. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). - Page 36 Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Note: Functions vary depending on model definition.
-
Page 37: Management
Management ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. -
Page 38: Language
Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode. 3D Format If the 3D content is not displayed correctly, you can select a 3D format that suits the 3D content you are viewing and obtain the best result. -
Page 39: Appendices
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Connected as described in the "Getting Started"... - Page 40 Partial, scrolling • Press "RESYNC" on the control panel. or incorrectly • For an incorrectly displayed image: displayed image • Follow the steps for item 2 (above) to adjust (For notebooks) the resolution of your computer. • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]...
- Page 41 Image is stretched When you play a DVD encoded in anamorphic or 16:9 when displaying a aspect ratio you may need to adjust the following "widescreen" settings: DVD title • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD.
- Page 42 OSD Messages Condition Message Reminder Message • Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. • Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used.
- Page 43 LED & Alarm Definition Listing LED Messages Lamp_LED Temp_LED Power LED Message Blue Input power plug Flash ON to Flash ON to Flash ON to OFF 100ms OFF 100ms OFF 100ms Standby Power button ON Lamp retry Quick Flashing Power off (Cooling state) Quick Flashing Power button OFF...
- Page 44 Cleaning and replacing the dust filters Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: Turn the projector off.
- Page 45 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!"...
- Page 46 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structural ceiling member, and secure the ceiling mount base to the ceiling. Choose the length combination based on actual environment. (CM-01S doesn’t include Type 2 and Type 3.) Type 1 Type 2...
- Page 47 Type 1: For the standard size use three bracket screws to mount the projector to the ceiling mount bracket. Type 2 and Type 3: Alternatively, for the larger size, use the sliding extensions for more supports. Type 1: Type 2: Type 3: Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat...
- Page 48 Adjust the angle and positioning as necessary. 360° Screw Type B Washer Type Diameter (mm) Length (mm) Large Small SCREW SPEC. M4 x 25 mm 55.00 mm 85.00 mm...
- Page 49 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system ® Resolution • X115/D602/EV-S62/V31S/AS304/D600+/X115H/ D602D/EV-S62H/V32S/AS314/D600D+/X114PH series: 800x600 SVGA resolution • X125H/D612D/EV-X62H/V32X/AX314/D610D+/ X124PH series: 1024x768 XGA resolution •...
- Page 50 Projection lens • X115/D602/EV-S62/V31S/AS304/D600+/X115H/ D602D/EV-S62H/V32S/AS314/D600D+/X114PH/ X125H/D612D/EV-X62H/V32X/AX314/D610D+/ X124PH/X135WH/D622D/EV-W62H/V32W/AW314/ D620D+/X134PWH series: F = 2.41 ~ 2.53, f = 21.85mm ~ 24.01mm, Manual Zoom & Focus • H6517ABD/E145F/HE-801K series: F = 2.50 ~ 2.67, f = 21.86mm ~ 24.00mm, Manual Zoom & Focus Projection screen size (diagonal) •...
- Page 51 Standard package contents • AC power cord x1 • VGA cable x1 • Remote control x1 • Battery x2 (for remote control) (option) • User's guide (CD-ROM) x1 • Quick start guide x1 • Security card x1 • Dust filters x1 (option) •...
- Page 52 Compatibility modes A. VGA Analog VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 640x480 31.5 640x480 37.9 640x480 37.5 640x480 43.3 640x480 61.9 SVGA 800x600 35.1 800x600 37.9 800x600 48.1 800x600 46.9 800x600 53.7 800x600 77.4 1024x768 48.4 1024x768 56.5...
- Page 53 VGA Analog - Extended Wide timing Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 47.8 1280x768 60.3 1280x768 68.6 1280x720 44.8 1280x720 92.9 1280x800 49.6 *1280x800-RB 119.909 101.6 1440x900 59.9 WSXGA+ 1680x1050 65.3 1920x1080 67.5 (1080P) 1366x768 47.7 WUXGA 1920x1200-RB 59.94 74.04 VGA Analog -Component Signal...
- Page 54 640x480 43.3 640x480 61.9 SVGA 800x600 35.1 800x600 37.9 800x600 48.1 800x600 46.9 800x600 53.7 800x600 77.4 1024x768 48.4 1024x768 56.5 1024x768 60.0 1024x768 68.7 1024x768 99.0 SXGA 1152x864 63.8 1152x864 67.5 1152x864 77.1 1280x1024 64.0 1280x1024 77.0 1280x1024 80.0 1280x1024 91.1 QuadVGA...
- Page 55 1440x900 59.9 WSXGA+ 1680x1050 65.3 1920x1080 67.5 (1080P) 1366x768 47.7 WUXGA 1920x1200-RB 59.94 74.04 HDMI - Video Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720x480(1440x480) 59.94 (29.97) 15.7 576i 720x576(1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 31.3 720p 1280x720 45.0...
- Page 56 1080p (Side by Side (Half)) 1920 x1080 56.3 1080p (Side by Side (Half)) 1920 x1080 67.5 15k-100kHz Horizontal scan rate: Graphic source monitor 24-120 Hz Vertical scan rate: Analog:165MHz range limits Max. pixel rate: Digital:165MHz Note: * Functions vary depending on model definition.
- Page 57 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 58 Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification...
- Page 59 EV-W62H/HE-801K/V31S/V32S/V32X/V32W/AS304/AS314/ AX314/AW314/D600+/D600D+/D610D+/D620D+/X114PH/ X124PH/X134PWH We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied:...
- Page 60 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the...