Turn Off Mode
Lamp Hour Elapse
Lamp Hour Reset
Downloaded From projector-manual.com Acer Manuals
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
Instant Off: Shuts down the projector without fan cooling.
Instant Resume: Resumes the system when the Power button
is pressed again within 2 minutes.
SPA: The lamp will flash for 3 minutes each time you shut
down the projector if you enable this mode to extend lamp
Standard: Properly shuts down the projector after fan
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 120 minutes)
Displays the lamp's elapsed operating time (in hours).
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
button and choose "Yes" to turn the lamp hour
counter to 0 hours.
Note: Functions vary depending on model definition.