Holding A Call; Using The Menu; Transferring A Call - Siemens optiPoint 410 economy User Manual

Step by Step
>
Hold?
Reconnect?
>
Consultation?
Dial?
>
Complete Transfer?

Holding a Call

You can use this function to put a current call on "hold"
to prevent the party at the other end of the line from
hearing an internal consultation for instance.
The "Hold" function must be activated by the ad-
ministrator.

Using the Menu

Prerequisite: You are in the middle of a call.
:
Select and confirm.
>
The call is placed on hold. The held party's number and
the message "On Hold" appear on the display.
After a configurable time interval, a double tone signal
reminds you that the party is still on hold and the mes-
sage "Still on Hold" appears on the display.
:
Confirm this option to resume the held call. You may
>
now either initiate a consultation call or terminate the
call.

Transferring a Call

You can transfer your current call to another party with
or without consultation.
:
Select and confirm (see also
>
o
Enter the telephone number of the party to whom the
call is to be transferred.
:
Confirm.
>
The party answers.
s
Notify user of call transfer.
:
Select and confirm (you may also simply replace the
>
handset to connect the parties).
The display indicates that the parties have been con-
nected. Replace the handset.
Operating the Telephone with the Display
page 30).
23