Cleaning And Care; Emptying The Condensed Water Container - Miele Heat pump dryer Operating Instructions Manual

Cleaning and care

Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water
container after every drying
programme.
The  indicator will light up if the
maximum level of the condensed water
container is reached.
To delete the  indicator: open and
close the door with the dryer switched
on.

To prevent damaging the door
and the front of the condensed water
container when pulling the container
out of the dryer:
always close the door completely.
 Pull out the condensed water
container.
 To prevent water running out, hold it
at the front and towards the back and
keep it in a horizontal position when
carrying it.
34
 Empty the container.
 Replace the container in the dryer.

Condensed water should not be
consumed. It could lead to health
problems for people and animals.
Condensed water can be put to
household use (e.g. used in a steam
iron or humidifier). To ensure that any
residual particles of fluff in the
condensed water are removed before
use, pass it through a fine sieve or
paper filter first.