Correct Use - Miele Heat pump dryer Operating Instructions Manual


Please observe the instructions in "Installation and connection"
and the "Technical data".

The accessibility of the plug must always be ensured, in order to
disconnect the tumble dryer from the mains.

Do not block the gap between the bottom of the tumble dryer and
the floor with plinth facings, deep pile carpet etc. This would hinder
a sufficient flow of air to the dryer.

Make sure the dryer door can be opened without hindrance after
installation.

Correct use


The maximum load for this tumble dryer is 8.0 kg (dry weight).
The maximum recommended loads for individual programmes are
given in the Programme chart.

To prevent the risk of fire, do not connect the tumble dryer via a
controllable socket (e.g. a timer or a peak-load switch-off device).
If the drying programme is interrupted before the end of the cooling
down phase, this could cause the laundry to self-ignite.
Warning and Safety instructions
11