Content Of The Package; System Requirements; Connecting P-Link; Advanced Usage Of P-Link - Tele System P-LINK 0.2 User Manual

P-Link 0.2

2.3.1 Content of the package

Please check the content of the package before using P-Link 0.2. The package consists in:
• 2 x P-Link 0.2 adapters;
• 2 x ethernet cables;
• 1 x quick start guide;
• 1 x warranty card.

2.3.2 System requirements

P-Link 0.2 does not have any particular requirement. It can work with any computer or device that has an operative
system with network support (that is a network card with ethernet port).

2.3.3 Connecting P-Link 0.2

This section can help the user in connecting P-Link 0.2 to a computer (or other network device). In order to connect
P-Link 0.2 you need to follow the steps below:
1. Use the ethernet cable in the package in order to connect P-Link 0.2 to the ethernet port of your PC (or network
device)
2. Plug P-Link 0.2 in a power socket
NOTE
Please do not use multiple power sockets because they can interfere with data transmission. We
suggest to use wall socket in order to achieve the maximum allowed speed.
3. Once plugged in 2 P-Link 0.2 adapters (as described above), the network is fully configured and you can start
using it. In order to protect (encrypt) your network, please follow the procedure described in section 2.4.1.

2.4 Advanced usage of P-Link 0.2

Data exchange by using electrical system can be encrypted in order to protect the privacy of your network. This
section can help you in using the Security button on P-Link 0.2. Data encryption can be activated by simply pressing
the Security button on all the P-Link 0.2 in your network (within 2 minutes).

2.4.1 Network encryption

In order to encrypt the network among 2 or more P-Link 0.2, simply press security button on each P-Link 0.2. By
pressing thisbutton the network will be encrypted with a random password.
NOTE
Powerline adapter cannot be configured in stand-by mode. All the powerlines are configured with the same
default password set by the factory process. This is done because if you want to add another P-Link 0.2 in
your network, you can do it automatically (by connecting the new adapter to a power socket) without the
need of pressing the security button in all the devices in your network.
Next subsections will describe some possible scenarios:
4