Bluetooth Reset; Usb Battery Charge Mode; Sound Settings; Eq7 / Subwoofer Level Adjust - Sony XAV-712HD Operating Instructions Manual

Bluetooth Reset

Unit status: Any status
Option Purpose
– To initialize all BLUETOOTH-
related settings such as pairing
information, phonebook data,
call history, preset dial, history of
connected BLUETOOTH devices,
etc.

USB Battery Charge Mode

Unit status: Any status
Option Purpose
High (), To switch the current (mA)
Standard capacity of the USB rear cable
labeled "HIGH CHARGE".
Set to [Standard] if the
connected device is not to be
recharged.
Firmware Version
Unit status: Any status
Option Purpose
– To update the Firmware version.
Open Source Licenses
Unit status: Any status
Option Purpose
– To display the software licenses.

Sound Settings

The following settings are not available during USB
Video playback.

EQ7 / Subwoofer Level Adjust

Unit status: During reception/playback
Option Purpose
OFF (), R&B, To select the equalizer curve;
Pop, Rock, Hip- customize the equalizer curve.
Hop, Dance,
Country,
Custom
Subwoofer: To adjust the volume level of the
(–6 - +6) subwoofer. (Available only when
: 0
[Subwoofer] is set to [ON].)

Balance / Fader Level Adjust

Unit status: During reception/ playback
Option Purpose
Balance : To adjust the sound balance
(–15 - +15) between left and right speakers.
: 0
Fader : To adjust the sound balance
(–15 - +15) between front and rear speakers.
: 0
Listening Position
Sets the listening position and subwoofer position.
Unit status: Any status
Option Purpose
Front L () To set to front left.
Front R To set to front right.
Front To set to center front.
All To set to the center of your car.
OFF To not set the listening position.
Subwoofer: To select the subwoofer position.
Near, Normal (Available only when
(), Far [Subwoofer] is set to [ON], and
the listening position is set to
[Front L], [Front R], [Front], or
[All].)
Custom To precisely calibrate the
listening position. Before
starting, measure the distance
between your listening position
and each speaker.

RBE (Rear Bass Enhancer)

Unit status: During reception/ playback
Option Purpose
OFF (), RBE1, To select the mode to use the
RBE2, RBE3 rear speakers as subwoofers.
(): Front left
(): Front right
(): Center front
(): In the center of
your car
27
GB