Touch Panel Adjust; Bluetooth Reset; Usb Battery Charge Mode - Sony XAV-602BT Operating Instructions Manual

Beep
Unit status: Any status
Option Purpose
ON (), OFF To activate the operation sound.
Front Panel Caution Alarm
Unit status: Any status
Option Purpose
ON (), OFF To activate the caution alarm.
Rotary Commander
Changes the operative direction of rotary
commander controls.
Unit status: Any status
Option Purpose
Default () To use in the factory-set
position.
Reverse To use on the right side of the
steering column.
Key Illumination
Unit status: Any status
Option Purpose
Rainbow () To change the color of the
(12 preset buttons on the unit to match the
colors, car's interior.
customized
color and 5
preset patterns)

Touch Panel Adjust

Unit status: Any status
Option Purpose
– To adjust the touch panel
calibration if the touching
position does not correspond
with the proper item.
Camera Input
Unit status: Any status
Option Purpose
OFF To deactivate the input.
Normal () To display the picture from the
rear view camera.
Reverse To flip the picture from the rear
view camera horizontally.
Rear View Camera Setting
Displays setting items on the picture from the rear
view camera to assist driving.
This setting is available only when:
 [Camera Input] is set to [Normal] or [Reverse].
 the parking brake is applied.
Unit status: Any status
Option Purpose
To display the marker lines.
Touch again to hide the marker
lines.
To adjust the length and/or
position of the marker lines.
Output Color System
Unit status: No source selected
Option Purpose
NTSC, PAL () To change the color system
according to the connected
monitor. (SECAM is not
supported.)
Bluetooth Connection
Unit status: Any status
Option Purpose
ON, OFF () To activate the BLUETOOTH
signal.

Bluetooth Reset

Unit status: Any status
Option Purpose
– To initialize all BLUETOOTH-
related settings such as pairing
information, phonebook data,
call history, preset dial, history of
connected BLUETOOTH devices,
etc.

USB Battery Charge Mode

Unit status: Any status
Option Purpose
High (), To switch the current (mA)
Standard capacity of the USB rear cable
labeled "HIGH CHARGE".
Set to [Standard] if the
connected device is not to be
recharged.
23
GB