Table of Contents
Advertisement
8. Operation
Please note:
In the delivery state the components of the FS20 wireless
control system do not respond to remote control commands.
They must first be addressed according to the instructions
provided in the respective device's user manual. The setting
of the basic functions is then possible.
a) Basic functions (2-channel operation)
Buttons are pressed quickly (to switch) or longer than 0.4 seconds (to dim).
2
Right button (
Quick press:
Long press (>0.4 sec):
1
Left button (
Quick press:
Long press (>0.4 sec):
The control indicator/LED (A) briefly lights up to signal that a command has
been transmitted.
Now you can program and operate the basic functions of the
FS20 wireless control system components.
Also read the following subsections, if you require an ex-
tended system with several components or you wish to use the
additional functions.
4
or
):
'On'
'Dim up'
3
or
):
'Off'
'Dim down'
9
Hide quick links:
Advertisement
Table of Contents
