C) Setting The Addresses (4-Channel Operation) - Conrad Electronic FS20 S4 Operating Instructions Manual

b) Setting the addresses (4-channel operation)
If the 'FS20S4' is operated in the 4-channel mode, proceed as follows in
order to change the address group and subaddress of the respective
button:
• Press and hold the button to be programmed.
• Now also press the button next to it. Keep both buttons pressed
simultaneously for at least 5 seconds!
• Wait until the control indicator/LED (A) blinks every second indicating
that the programming mode is activated.
• Enter a 2-digit address group and a 2-digit subaddress using the
2 3
, and
Example: 1112 (11 = address group, 12 = subaddress)
• The programming mode ends automatically once you have entered the
fourth digit. The control indicator/LED (A) goes out.
4
buttons.
1
,
21