Table of Contents
Advertisement
b) Setting the addresses (2-channel operation)
A channel's address comprises a 2-digit address group and a 2-digit
subaddress.
Example: 1131, address group 11, subaddress 31
The address group '11' is factory set for both channels.
Subaddress '11' is pre-programmed for channel 1 and
subaddress '12' is pre-programmed for channel 2.
Channel:
Address: 11 11
If several transmitters are to be operated at the same time and control
different receivers, then different addresses need to be set on the transmit-
ters.
1. Setting a single address (address group/subaddress)
•
Press both buttons of the respective button combination simultane-
ously for at least 5 seconds (for example, the buttons
channel 1).
The control indictor/LED (A) now blinks every second.
•
Enter a 2-digit address group and a 2-digit subaddress using the
2
3
,
and
Example: 1431 (address group 14, subaddress 31)
•
The programming mode ends automatically once you have entered the
fourth digit. The control indicator/LED (A) goes out.
Please note:
The address group 44 and the subaddress 44 both have a
particular meaning (see the following item)!
1
4
buttons.
2
11 12
1
2
and
for
1
19
,
Hide quick links:
Advertisement
Table of Contents
