Related Manuals for Kuppersbusch EEBP 6200.8 MX
Summary of Contents for Kuppersbusch EEBP 6200.8 MX
- Page 1 Guía Rápida de Uso Folha de Características Feature List Feuille de Caractéristiques Datenblatt EEBP 6200.8 MX...
-
Page 2: Control Panel
EEBP 6200.8 MX 1 Control Panel 2 Fixing to Unit 12:00 3 Oven Seal 4 Grill element 5 Chrome Support + Telescopic Guide 6 Grid 7 Cake Tray 8 Roasting Tray 9 Hinge 10 Door 11 Air cooling outlet 12 Door switch-lock... -
Page 3: Oven Functions
Oven Functions Switch off oven Turbo The fan distributes the heat coming from an element located at the back of the oven. As a Conventional result of the evenly distributed temperature, It is used for sponges and cakes where the food can be cooked on two levels at the same heat received must be uniform to achieve a time. -
Page 4: Use Of The Oven
Use of the Oven Note Pre-heating function (not valid for pyrolytic function): The electronic clock features Touch-Control For any cooking function or when the oven is technology. To operate, simply touch the glass being heated for the first time (pre-heating), control symbols with your fingertip. - Page 5 Programming the Timer Alert 7 Set the controls to 0 to turn off the oven. You can change the timer at any time by tou- 1 Touch the symbol on the glass surface. ching the symbol and later the It will begin to flash. 0:00 will appear on the symbols.
- Page 6 Programming Cooking Time and Cooking 11.Touch any symbol to stop the signal. The Stop Time oven will turn on again. 12.Set the controls to 0 to turn off the oven. 1 Touch the symbol on the glass surfa- ce. It will begin to flash. 0:00 will appear You can change the timer setting while coo- on the display and the will light...
- Page 7 PROGRAMMING AND OPERATING THE PYROLYTIC FUNCTION IMPORTANT: At this point, the oven is pro- Follow the instructions below to carry out a grammed and the pyrolytic cleaning cycle is pyrolytic cleaning cycle: underway. During the cycle, none of the timer 1 IMPORTANT: Remove all accessories functions can be selected, except the child (shelves, grids, side supports to hold up...
- Page 8 13 Open the oven door and wipe the inside 15 The oven is now ready to be used. with a damp cloth, cleaning up the ash IMPORTANT: If any incidents are detected in from the cleaning cycle. Areas in the oven the programming and operating of this func- that are difficult to access will need to be tion, consult the section “Incidents while...
- Page 9 INCIDENTS WHEN OPERATING THE PYROLYTIC FUNCTION INCIDENT CAUSE SOLUTION My accessories and shelf You have not removed the You must replace them and supports are damaged. accessories and supports remove them in later cleaning during the pyrolytic cleaning cycles. cycle. The enamel colour has The chemical composition of This is normal and does not...
- Page 10 INCIDENT CAUSE SOLUTION I have programmed the Call the Technical Assistance Pilot light does not work pyrolysis function, the oven is Service. properly. working properly but pilot light is not lit up. The pyrolysis programme has You did not turn the control 1.
- Page 11 FICHA / FICHA / BROCHURE / FICHE / DATENBLATT Fabricante Fabricante Manufacturer Fabricant Hersteller KÜPPERSBUSCH Modelo Modelo Model Modèle Modell EEBP 6200.8 MX Clase de Classe de efi- Energy Classement Energieeffizienz- eficiencia ciência ener- efficiency selon son klasse auf energética, gética, numa...