Checking/Changing/Cancelling Timer Settings - Sony SLV-ED100ME Operating Instructions Manual

Checking/
changing/
cancelling timer
settings
Before you start...
• Turn on your TV and set it to the
video channel.
1
Press I/u to turn on the VCR.
2
Press MENU, then select TIMER SET/
CHECK:
• If you want to change or cancel a setting, go
on to the next step.
• If you do not need to change or cancel the
settings, press OK, then turn off the VCR to
return to recording standby.
3
Press CURSOR >/. to select the setting you want to change or cancel:
• To change the setting, press CURSOR ?// to select the item you
want to change, and press CURSOR >/. to reset it. Then, press
CURSOR / repeatedly until the cursor (z ) appears at the beginning
of the line.
• To cancel the setting, press CLEAR.
4
Press OK.
If any timer settings remain, turn off the VCR to return to recording
standby.
When the timer settings overlap
The programme that starts first has priority and the second programme
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
Programme 1
Programme 2
Programme 1
Programme 2
about 20 seconds
will be cut off
about 20 seconds will be cut off
I/u
MENU
OK
CURSOR
>/./?//
1 2 3
CLEAR
4 5 6
7 8 9
0
TIMER SET / CHECK
DATE START STOP PROG
3 . 0 9 THU 2 0 : 0 0 2 1 : 0 0
. 2 10 SAT 1 0 : 0 0 1 1 : 3 0 2 0 LP
MON – FRI 1 4 : 0 0 1 5 : 0 0 5 0 LP
EVERY SUN 6 : 3 0 7 : 3 0 4 2 LP
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
Additional Operations
2 8 . 9 TUE
3 5 SP
63