Step 4: Tuning Your Tv To The Vcr - Sony SLV-ED100ME Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected the VCR to your TV using the audio/video cable, skip
this step.
1
ON/STANDBY Press I/u ON/STANDBY to turn on the VCR.
2
Press RF CH on the VCR lightly.
RF CH
The factory-preset RF channel appears in the display window (51
for SLV-ED100ML and ED100MI, 32 for SLV-ED100ME).
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
Some TV has the programme position, such as 0, that is reserved for
a VCR. In this case, select that programme position for the VCR
picture. Refer to the instruction manual of your TV for details.
I/u ON/STANDBY
RF CH
SP
PROGRAM +/–
APC
continued
11
Getting Started