Installing The Edp Cable; Removing The Coin-Cell Battery - Dell Latitude E5450 Owner's Manual

Installing the eDP cable

1. Fix the eDP cable in its place on the display assembly.
2. Connect the eDP cable to its connector.
3. Install the:
a. display panel
b. display bezel
c. display assembly
d. display-hinge brackets
e. palmrest
f. keyboard
g. keyboard trim
h. hard-drive assembly
i. memory
j. battery
k. base cover
4. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove the:
a. base cover
b. battery
c. memory
d. hard-drive assembly
e. keyboard trim
f. keyboard
g. palmrest
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
35