Installing The Base Cover; Removing The Battery - Dell Latitude E5450 Owner's Manual

NOTE: You may need a sharp tool to pry the base cover from its edge.

Installing the Base Cover

1. Place the base cover to align with the screw holders on the computer.
2. Tighten the screws to secure the base cover to the computer.
3. Follow the procedures in

Removing the Battery

1. Follow the procedures in
2. Remove the base cover.
3. Disconnect the battery cable from its connector [1] and release the cable from its routing channel [2].
4. Perform the following steps:
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
9