Panasonic NN-S962BC/WC Operating Instructions Manual page 9

BEFORE CLEANING:
Unplug at socket of the oven. If this is not
possible, leave oven door open to prevent
oven from accidentally turning on.
Inside of the oven:
Wipe with a damp cloth. Mild
detergent may be used if the
oven gets very dirty. The use of
harsh detergents or abrasives
is not recommended.
Oven Door:
* Wipe with a soft cloth when steam
accumulates inside or around the outside
of the oven door. During cooking,
especially under high humidity conditions,
steam is given off from food. (Some steam
will condense on cooler surfaces, such as
the oven door. This is normal.)
* Inside surface is covered with a heat and
vapour barrier film. Do not remove.
Care of Your Microwave Oven
Glass Tray:
Remove and wash in
warm, soapy water or
in a dishwasher.
7
AFTER CLEANING:
Be sure to replace the Roller Ring and Glass
Tray in the proper position and press
Stop/Reset Pad to clear the Display Window.
Outside oven surfaces.
Clean with a damp cloth.
To prevent damage to the
operating parts inside the
oven, water should not be
allowed to seep into
ventilation openings.
Control Panel:
* Covered with a removable
protective film to prevent scratches
during shipping. Small bubbles
may appear under this film.
(Hint - To remove film, apply
masking or clear tape to an
exposed corner and pull gently.)
* If the Control Panel becomes wet,
clean it with a soft, dry cloth. Do
not use harsh detergents or
abrasives on the Control Panel.
Do not remove cover.
Roller Ring and oven cavity floor:
Wipe the bottom surface of the oven with mild
detergent, water or window cleaner and dry.
Roller Ring may be washed in mild soapy
water or in a dishwasher. These areas should
be kept clean to avoid excessive noise.