Recipient Setting - Samsung SRD-476D User Manual

main menu

Recipient Setting

You can add/remove a recipient(s) to/from the specified group and edit the group if necessary.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <Mailing Service>, and press [ENTER] button.
2. Select <Recipient>.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Add : You can select a recipient name, e-mail address or
group.
You should have created a group in the <Group> menu
item before you can add a user to the group.

For inputting the recipient name and email address, refer to
"Using Virtual Keyboard". (Page 34)
4. When the recipient setup is done, press <OK>.
SNMP
You can configure the settings for the SNMP protocol.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <SNMP>, and press [ENTER] button.
The SNMP setup screen appears.
2. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Enable SNMP v1 : SNMP version 1 will be active.
• Enable SNMP v2c : SNMP version 2 will be active.
- Read Community : Read community where you can
access objects that support the SNMP protocols.
- Write Community : Write community where you can
access objects that support the SNMP protocols.
3. When the SNMP setup is done, press <OK>.
72_ main menu
Mailing Service
SMTP Event Group
 Group
All Group
Group Name e-Mail Address
OK Cancel
Mailing Service
SMTP Event Group
 Group
ABC
Add recipient
Group Name e-Mail Address
 Name
 Email
 Select Group
ABC
OK Cancel
OK Cancel
SNMP

Enable SNMP v1

Enable SNMP v2c
Read Community public
Write Community write
OK Cancel
Recipient
Add
Delete
Previous/Next Page
Recipient
Add
Delete
Previous/Next Page