qleeno QS101 Operating Instructions Manual page 6

Mounting the brush/scouring pad
1. With Kick Stand folded up, lift Qleeno to upright (vertical) position and turn brush/scouring pad holder counter-
clockwise to remove it.
2. Mount brush and turn clockwise until it contacts mounting tabs on hub (ref. photo below).
3. If using scouring pad, fasten the pad to the velcro on the pad holder, then mount in same way as brush.
NOTICE: For best results and longer pad life, ensure scouring pad is concentric with holder.
Unfolding the Handle
Unlock handle support locks on both sides of handle, raise handle to desired position and re-lock handle supports.
Handle is adjustable to vertical position or intermediate positions to accomodate the user.
Adjusting the Casters
NOTICE: The Qleeno brush/pad should always operate as close to horizontal as possible, and should not cause
the machine to drag or pull in any direction. Due to normal usage, the casters may require occassional
adjustment.
1. Pull knob on adjustment arm (ref. photo) and raise/lower the caster to desired position.
6