Arctic Cat Crossfire 700 EFI (EB) 2006 Operator's Manual page 18

4. Repeat steps 2 and 3 on the
other cable; then compare the
measurements.
NOTE: The measurements must
be equal and within the specifica-
tions from the chart. If the mea-
s u r e m e n t s a r e
specifications, no adjustment is
necessary. If they are not within
specifications, proceed to step 5.
APV CABLE LENGTH
ENGINE MODEL
34.5 ±1 mm
700 cc
(1.35 ± 0.039 in.)
5. Loosen the jam nut on the cable
housing to be adjusted; then
u s i n g t h e a d j u s t i n g n u t s ,
lengthen or shorten the housing
as needed.
14
w i t h i n
6. While holding the adjusting nut
in place, tighten the jam nut
securely.
7. Install the actuating cables to
the servo; then install the servo
cover.
GENERAL INFORMATION
0739-715