KTM 690 ENDURO EU Owner's Manual page 85

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove the cover
–
Press the brake caliper by hand on to the brake disc in order to press back the brake
pistons. Ensure that brake fluid does not overflow from the brake fluid reservoir and
suction it off if necessary.
Info
Make sure when pushing back the brake pistons that you do not press the brake
100254-11
caliper against the spokes.
–
Remove split pin
linings.
–
Clean brake caliper and brake caliper support.
–
Check parts for damage and wear. Replace damaged or worn parts.
100290-10
.

with membrane .
 
, remove bolt toward the right by striking it and remove the brake
 
83