Advertisement
For to avoid interference of anti-signal, the power supply and controllers of
each light must connect with the ground and the connection must be good
and dependable.
Keep maintain the equipment timely. (Include the examination of the screws,
the lamp sweeps etc..)
The operation hint:
The operation method, the guidance and the notices are jotted down very
simple in the book, so read it carefully before use the product.
If don't understand the operation method, read this manual carefully in order
to operate by exactitude rather than depend on your own judgment.
If don't obey the request of this manual but meet trouble result in without
authorization, or occur breakdown, factory will be all irresponsible.
The laypeople please not dismantle or replace the spare parts ( the machine
spare parts and the PCB electronics component). If meet difficult technique
problems and maintenance, please contact with the dealer or the
manufacturer directly.
Confirm the power has cut off before separate the light or do any other
maintenance. Keep the light clear is very important. Dust and oil enter into the
light or touch the machine is prohibited, if happen, the brightness of the light
will weaken,, keep the light clear can let guarantee the brightness of the light,
and also can prolong the lifetime of the machine. High quality clear liquid and
silk is suggested to clear the Moving Head light Alcohol and Chemical Liquid
is prohibited at any time, gobo wheel can be cleaned by soft brush, and the
inside can use the vacuum to clear it, at least one year clear once. Color
wheel and Gobo wheel should be cleaned at least once/month.
Operate Description
Turn the DIP switch, the light may choose the function:
Page 7
www.flash-butrym.pl
Advertisement
